Create the rslogix 5000 project – Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual User Manual
Page 22
Advertising
22
Publication 1756-UM534B-EN-P - November 2010
Chapter 1 The 1756-RIO Module-Getting Started
7. Click Finish.
Create the RSLogix 5000
Project
Once the add-on profile is installed, you are ready to create the RSLogix 5000
project. In this section, you will:
start a new project.
configure the controller in the project.
add the 1756-RIO module to the project.
enter the requested pack interval (RPI).
Advertising