Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 122)

122 Publication 1756-UM534B-EN-P - November 2010
Chapter 5 Monitor Remote I/O
To monitor the scanner log, follow this procedure.
1. Run the LogMon utility. To launch LogMon, from the Monitor menu,
choose Debug Log from the pull-down menu.
2. Select OK once you select the 1756-RIO module on the network.
A window displays confirming LogMon has started. If there are no
errors present, the LogMon screen stays clear.
ATTENTION
You must set the RSLinx communication path for the module to
start the LogMon utility.