Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 40)

40 Publication 1756-UM534B-EN-P - November 2010
Chapter 2 Configure Scanner Mode
5. On the main menu, from the Configure menu, choose Download, or
click the Download Config to Module button on the toolbar.
Autoconfigure Racks You can autoconfigure racks attached to the network, or add additional racks
manually. The Autoconfigure command scans the Remote I/O network to
determine which racks are present.
The module automatically detects the network baud rate and configures the
racks on the attached Remote I/O network.
The 56RioCfgScan tool sends messages to all possible racks, detects all
possible baud rates, and from the replies, determines which racks are on the
network.
Main Menu
Toolbar