Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 92)

92 Publication 1756-UM534B-EN-P - November 2010
Chapter 4 Link Module Configuration with RSLogix 5000 Project
To upload a configuration from the 1756-RIO module to the project, follow
these steps.
1. From the Configure menu, choose Upload Configuration.
2. Set the communication path when the RSLinx dialog box appears by
navigating to the 1756-RIO module on the network, and clicking OK.
TIP
You can also set the communication path by selecting the
Communication menu and choosing Select RSLinx Path.
TIP
You can also upload/download configurations from the Module
button on the configuration tool’s toolbar.
Download to the
module. Upload from
the module.