Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 33)

Publication 1756-UM534B-EN-P - November 2010 33
The 1756-RIO Module-Getting Started Chapter 1
7. On the 56RioCfgScan dialog box, from the Tools menu, choose Set
1756-RIO Module Scanner/Adapter Mode.
8. On the RSLinx Path Selection dialog box, click the Autobrowse box to
browse the path to the 1756-RIO module to set the communication
path and click OK.
The configuration tool then displays the current mode in the
56RioSetMode dialog box and lets you select the mode you want to use.
The 56RioCfgScan program
title displays at the top of the
configuration tool’s dialog box
indicating that scanner mode
was chosen in the module’s
properties in the RSLogix 5000
add-on profile, and that you
are running the scanner
configuration tool’s firmware.
IMPORTANT
Remember, specific firmware downloads, depending on mode
selection. Also, you are prompted to reset the communication
path when changing from one mode to another.