Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 71)

Publication 1756-UM534B-EN-P - November 2010 71
Configure Adapter Mode Chapter 3
Delete Racks
To delete a rack, follow these steps.
1. On the 56RioCfgAdpt dialog box, expand the rack in the I/O tree,
right-click on the rack in the I/O tree and choose Delete Rack(s).
2. To delete a partial rack, expand the rack in the I/O tree, right-click on
the partial rack and choose Delete Partial Rack.