Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 23)

Publication 1756-UM534B-EN-P - November 2010 23
The 1756-RIO Module-Getting Started Chapter 1
Configure the Controller
1. Launch RSLogix 5000 programming software, if it is not opened.
2. In the RSLogix 5000 programming software Controller Organizer, from
the File menu, choose New.
3. On the New Controller dialog box, select a 1756 controller, the Revision
number, Name, Chassis Type, and Slot number. The 1756-RIO module
can only be used in RSLogix 5000 programming software, version 17, or
later.
4. Click OK.