Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual - Manual (Page 34)

34 Publication 1756-UM534B-EN-P - November 2010
Chapter 1 The 1756-RIO Module-Getting Started
In the 56RioSetMode dialog box, select the mode from the New Mode pull-
down menu and click OK to download the new firmware.
A status window displays showing the progress of the mode change.
The 1756-RIO SetMode Confirmation dialog box displays the version
of the firmware it is about to download. Check carefully that this
firmware version is correct.
IMPORTANT
Steps 9 and 10 change the configuration of the RIO module
between adapter and scanner mode. If your module is
configured for the desired mode, these steps are not necessary.
IMPORTANT
Changing the 1756-RIO module mode or updating firmware
clears the remote I/O configuration stored on the 1756-RIO
module.