Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 109)

Chapter 7
Configuring Diagnostic Messages
7-11
Message Fragments (i.e., Processor Name, Instruction Comment, etc.) are
selected from buttons on the right side of the screen. When a fragment is
selected, you are prompted to type in the maximum length of the fragment.
This value will be inserted as part of the Message.
Fragment Length window
Finally, each individual message can be configured as to where it will
display the message. Using selections from the “Send To:” portion of the
dialog box to select Banner (Display), Marquee, Printer and Logger:
6. Click on OK when you have completed and are satisfied with your
selections.
7. Repeat this procedure for each message template you create.
Now that you have configured your diagnostic messages, you can debug
any problems you may have encountered. Chapter 8 describes the
procedures for debugging your DDMC32 setup and how to configure your
system and prepare to run DDMC32. What to Do Next