Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 42)

Configuring SDS Instructions
Chapter 4
4-6
2. Press [F1] - Online Program .
The system displays the online program directory (see the figure below).
Online Program Directory (PLC-5)
+= PROGRAM DIRECTORY FOR PROCESSOR: SDSDEMO ====================[ ONLINE ]===+
| File Name Type Size(words) |
|––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––|
| 0 system 4 |
| 1 undefined 0 |
| 2 ladder 259 |
| 3 SDS5 custom routine 1350 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+==============================================================================+
Press a function key or enter a program descriptor.
>
Program PLC–5/25 Addr 5
Proc Save Return Change Who Memory Monitor Monitor
Functns Restore to Menu Station Map File SFC
F1 F2 F3 F4 F5 F6 F8 F9
The cursor is placed on the first user-accessible file.
If the program directory does not list the SDS CAR file, you will need to
download it to the PLC-5; otherwise your can go to the “Entering or
Modifying an SDS Instruction” on page 4–9.
Downloading the SDS CAR File
Important: To download the SDS CAR file you must be in online
programming mode.
Do the following to download the SDS CAR file into your program:
1. Press [F2]- Save Restore.
The system displays the Save Restore function keys.