Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 22)

Chapter 1
Understanding How a DDMC32 System Works
1-10
The DDMC32 software also provides:
a fault log that shows all fault messages generated by the software
an interface for marquees to optionally display diagnostic messages
a fault report which lets you see where and when each fault occurs by
frequency and duration
These selections are configured by the user who may direct the faults to
some or all of the above devices.
6200 Series Software
This software provides the capability to program and monitor your PLC-5
family programmable controller using your operator interface terminal.
6200 Series Software uses menu-driven screens and configuration utilities
that simplify entry. You can use 6200 Series Software to develop ladder
programs and configure DDMC32 instructions.
To learn more about 6200 Series Software, refer to the PLC-5
Programming Software Documentation Set (publication 9399-PLC5MAN)
or the PLC-5/250 Programming Software Documentation Set (publication
9313–5250).
PLC-5 Family of Programmable Controllers
The PLC-5 family of programmable controllers is the heart of the
DDMC32 system, providing a flexible framework for processing. You can
create:
a centralized configuration to control a large number of I/O from one
location
a distributed configuration to control I/O from several remote locations.
(All PLC-5 processors can be linked using the Data Highway Plus to a
common operator interface terminal where programming, monitoring,
and troubleshooting are performed.)