Rockwell Automation D64046.5.1 U MNL WIN DDMC User Manual
Page 80
Chapter 5
Configuring DFA Instructions
5-6
The system displays your ladder program and the Ladder Editor main
menu.
2.
Cursor to the rung where you want to position the DFA instruction.
If you are modifying an existing rung, cursor to the DFA rung.
3.
Press
[F10] - Edit.
The system displays the Ladder Editing screen.
4.
If you are:
editing an existing rung, press
[F5] - Modify Rung.
entering a new rung, press
[F4] - Insert Rung.
The system displays the Edit Rung screen.
5.
If you are:
changing an existing instruction, press [
F5] - Modify
Instruction.
entering a new instruction, press
[F4] - Insert Instruction.
The system prompts you for the instruction you want to add.
6.
Type
DFA
, and press
[ENTER]
. (If you are modifying an existing
instruction, DFA already appears at the prompt.)
Important: As an alternate method of entering the instruction, you may:
Press
[F10] - Others.
Press
[F9] - Seqncer
from the Instruction Classes function keys.
Press
[F5] - DFA
from the Sequencer function keys.