Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 73)

Configuring SDS Instructions
Chapter 4
4-37
To retrieve an SDS instruction from a file:
1. Press [F4] – Change Config from the Extended Edit screen.
The system displays the Change Configuration screen (below).
Change Configuration Screen (PLC-5)
DRILLSDS.SLS 06–08–90 09:35:26
+–––––––––––––––––––––––––––––––––+
|DRILL MACHINE HEAD 1 |
|NUMBER OF STEPS: 12 |
|NUMBER OF IO: 8 |
+–––––––––––––––––––––––––––––––––+
Use up or down arrow to choose a configuration and RETURN to select.
Program PLC–5/25 Addr 1
2. Cursor to the file you want to copy and press [ENTER] .
If the file contains too many steps or I/O, the system displays a message
telling you that you cannot copy the configuration. Otherwise, the
configuration is copied.
The system returns to the Step Directory screen.
Once you have configured all of your steps, save the SDS instruction. Chapter
5 describes how to configure a DFA instruction. Chapter 6 describes how to
create and/or update a message database with the documentation you import. What to Do Next