Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 44)

Configuring SDS Instructions
Chapter 4
4-8
5. Download the CAR file:
If you are using a PLC-5:
a. Press [F1] - Begin Restore.
The system prompts you to enter a file number.
b. Type the file number and press [ENTER].
The system returns to the Program Directory.
If you are using a PLC-5/250:
a. Press [F1] - Begin Oper.
The system prompts you to enter a program descriptor.
b. Type the program descriptor, for example, 1CAR0, and press
[ENTER].
In the program descriptor, the first number refers to the number in
the thumbwheel window on the logic processor (in this case, 1). A
logic processor runs control logic which controls steps, transitions,
processor input interrupts, selectable timed interrupts, and
independent background programs.
CAR refers to the type of file; 0 refers to the program file number into
which the CAR will be downloaded.
The system returns to the Program Directory.