Rockwell Automation D64046.5.1 U MNL WIN DDMC User Manual
Page 127
Advertising
Chapter 9
DDMC32 System
Configuration and Operation of the
9-3
The DDMC32 system enables you to configure the timing on your
marquee output. You can enable Clock or Creep output.
Enable the Clock/Creep Functions
1.
From the Configure menu, choose Clock/Creep.
The Configure Clock/Creep screen appears.
Configure Clock/Creep screen
2.
To use the Clock or Creep functions, check the Enable Clock/Creep
checkbox, and then click on either Clock or Creep.
If you check Clock, the Clock section of the screen is enabled; if you
check Creep, the Creep section of the screen is enabled.
Configuring the Clock/Creep
Option
Advertising