Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 53)

Configuring SDS Instructions
Chapter 4
4-17
Port Number Entries
For this link: Enter this port number:
ASCII, DF1, Master, and Slave 1
port 2A, 2B for DH and DH+ 2
port 3 for DH and DH+ 3
4. If you want to alter an existing address or enter a new address in a list of
I/O points:
a. Press [F7] - Modify IO Addr. The system prompts you for an
address.
b. Type in your I/O address and press [ENTER]. Valid entries include
any logical address specified to the bit level, with the exception of
indirect addresses.
c. After entering or modifying an I/O address, cursor to the next field
and repeat this step until you have completed all entries or changes.
5. After entering all your I/O addresses, press [ESC] to display the I/O
Definition screen function keys, and then press [ENTER] .
The system returns to the SDS instruction.
6. Press [ENTER].
The system displays the Edit Rung screen.
Edit Rung Screen (PLC-5)
I DRILL I
I MACHINE I
I HEAD 1 I
I +SDS–––––––––––––––––––––––––+ I
I––––––––––––––––––––––––––––––––––––––––––+SMART DIRECTED SEQUENCER +–(EN)–I
I |Control File N10:0| I
I |Step Desc. File N11:0+–(ST) I
I |Length 156| I
I |No. of Steps 12+–(ER) I
I |Position/Step: 0| I
I |No. of I/O 8+–(ES) I
I |Prog file number 3| I
I +––––––––––––––––––––––––––––+ I
Press a function key for desired editing function, or type a mnemonic.
(file 2, rung 8)
Program Forces:None Edits:None Rung:Modify PLC–5/25 Addr 1
Branch Append Insert Modify Delete Undel Accept
* Instr Instr Instr Instr Instr Rung
F1 F3 F4 F5 F6 F7 F10