Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 112)

Chapter 8
Debugging Your DDMC32 System
8-2
Sample Error List Screen
ERRORS IN STATION 7R CONFIGURATION
ERROR 1 : Step 1, Input 0;transition condition results in an input state
mismatch for specified destination step
ERROR 2 : Step 15, timer; specified destination step is not configured
Press a key for desired function, or <ESC> to return to directory.
Program monitor mode Current Step 0 PLC–5/12 Addr 4
The error list displays configuration errors in different formats depending
on the type of error that occurs. The errors that could occur are:
input state mismatch
timer destination step not configured
timer destination step out of range
destination step not configured
destination step out of range
invalid configuration
marked exit
warning timeout
These errors are described in the following sections.
Input State Mismatch
Important: This type of error is not used for ANDed conditions.