Rockwell Automation D64046.5.1 U MNL WIN DDMC - Manual (Page 92)

Chapter 5
Configuring DFA Instructions
5-18
6. Once you have completed your changes, press [ENTER] to accept the
comment.
7. Press [ESC] to return to the DFA Message screen.
8. Cursor to the state column of the desired input and press
[F8] - Input State.
[F8] is a toggle key which allows you to choose from OFF, ON, or
NONE (if you select NONE, a message is never sent) for the state in
which you want your message to be sent. Continue to press this key
until you reach the state in which you want your message to be sent.
Once you have configured your diagnostic messages, you can exit the DFA
instruction.
To exit the DFA instruction:
1. Press [ESC] .
The system displays the DFA Message screen.
2. Press [F10] - Accept Edits .
The system prompts you to confirm your decision.
3. Press [F8] - Yes .
4. Press [F3] - Exit . Once you’ve entered and documented all of your
input information, the system asks if you want to save your work.
5. Press [F8] - Yes .
The system displays the Ladder Editor main menu. If you have other
DFA instructions to configure or edit, you can do so as described in
the “Enter or Modify DFA Instructions” section in this chapter. If
not, you may exit the program as described in the next chapter.
Chapter 6 describes how to create a message database with the
documentation imported from the DFA instruction.
Exiting the DFA Instruction
What to Do Next