Reconnect sercos communication – Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual User Manual
Page 216
Advertising
Publication 2093-UM001A-EN-P — March 2007
216
DC Common Bus Applications
Reconnect SERCOS Communication
Follow these steps to reconnect SERCOS communication.
1. Remove three-phase and control power from the Kinetix 2000 drive
system.
2. Replace the SERCOS fiber-optic cable removed earlier.
Fiber-optic cable connections (Tx and Rx) are located on the top of each
IAM/AM.
3. Reapply three-phase and control power.
Advertising