Rockwell Automation SA3100 Distributed Power System Drv Config,Program User Manual
Page 78
3-40
SA3100 Drive Configuration and Programming
Power Device Status Register (Continued)
204/1204
Phase V-Upper IOC A
Bit 1
The Phase V-Upper IOC A bit is set if an
overcurrent is detected in the phase V upper
power device.
Hex Value:
0002H
Sug. Var. Name:
V_UPA@
Access:
Read only
UDC Error Code:
N/A
LED:
N/A
Phase W-Upper IOC A
Bit 2
The Phase W-Upper IOC A bit is set if an
overcurrent is detected in the phase W
upper power device.
Hex Value:
0004H
Sug. Var. Name:
W_UPA@
Access:
Read only
UDC Error Code:
N/A
LED:
N/A
Phase U-Lower IOC A
Bit 3
The Phase U-Lower IOC A bit is set if an
overcurrent is detected in the phase U lower
power device.
Hex Value:
0008H
Sug. Var. Name:
U_LOA@
Access:
Read only
UDC Error Code:
N/A
LED:
N/A
Phase V-Lower IOC A
Bit 4
The Phase V-Lower IOC A bit is set if an
overcurrent is detected in the phase V lower
power device.
Hex Value:
0010H
Sug. Var. Name:
V_LOA@
Access:
Read only
UDC Error Code:
N/A
LED:
N/A
Phase W-Lower IOC A
Bit 5
The Phase W-Lower IOC bit is set if an
overcurrent is detected in the phase W
lower power device.
Hex Value:
0020H
Sug. Var. Name:
W_LOA@
Access:
Read only
UDC Error Code:
N/A
LED:
N/A