Dell PowerEdge VRTX - Manual (Page 131)

131
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Performing Integrated Cable Tests Using CLI Commands
The following table contains the CLI commands for performing integrated
cable tests.
The following is an example of the CLI commands:
Management Security
This section describes the pages used to manage device security.
It contains the following topics:
• Access Profiles
• Profile Rules
• Authentication Profiles
• Select Authentication
Table 6-33. Integrated Cable Test CLI Commands
CLI Command Description
test cable-diagnostics tdr
interface interface-id
Performs VCT tests.
show cable-diagnostics tdr
[interface interface-id |
detailed]
Shows results of last VCT tests on
ports.
show cable-diagnostics cable-
length [interface interface-id |
detailed]
Displays the estimated copper
cable length attached to a port.
console> enable
console# test cable-diagnostics tdr gi2/4
Cable is open at 100 meters.
console# show cable-diagnostics cable-length
interface gi2/4
Port Length [meters]
------- ----------------
gi2/4 < 50