Dell PowerEdge VRTX User Manual

Page 234

Advertising
background image

234

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User

Guide\Plasma_UGSwitching_NetworkSecurity.fm

D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY

RADIUS, None — Perform port authentication first by using the

RADIUS server. If no response is received from RADIUS (for

example, if the server is down), then no authentication is

performed, and the session is permitted.

RADIUS — Authenticate the user on the RADIUS server. If no

authentication is performed, the session is not permitted.

None — Do not authenticate the user. Permit the session.

Guest VLAN — Enable/disable the use of a Guest VLAN for

unauthorized ports. If a Guest VLAN is enabled, all unauthorized

ports automatically join the VLAN selected in the Guest VLAN ID

field. If a port is later authorized, it is removed from the Guest VLAN.

VLAN List — Select the Guest VLAN from the VLAN list.

Monitoring Mode — Enable/disable logging authentication attempts.

Monitoring VLAN — Enter the ID of the VLAN to which traffic

being monitored is routed after unsuccessful Dot1x authentication.

Accept Supplicant when Dynamic Policy/ACL Assignment Has No

Resources — If no resources remain in the TCAM, the system can

either reject (disable) or allow (enable) successful authentication.

Enabling Port-Based Authentication Globally Using the CLI Commands

The following table summarizes the CLI commands for enabling the port

based authentication as displayed in the Port Based Authentication Global

page.

Table 7-12. Port-Based Authentication Global CLI Commands

CLI Command

Description

aaa authentication dot1x

default {radius | none |

{radius | none}}

no aaa authentication dot1x

default

Specifies one or more AAA methods for

use on interfaces running IEEE 802.1X.
Use the no form of this command to

restore the default configuration.

dot1x system-auth-control

no dot1x system-auth-control

Enables 802.1x globally.
Use the no form of this command to

restore the default configuration.

Advertising