Dell PowerEdge VRTX - Manual (Page 317)

317
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_VLAN.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
The following is an example of the CLI commands:
Port Settings
After a VLAN has been defined, assign ports to it.
To assign a VLAN to untagged packets, arriving on the device, enter the port
default VLAN ID (PVID). All untagged packets arriving to the device are
tagged by the ports PVID.
All ports must have a defined PVID. If no other value is configured, the
default VLAN PVID is used. VLAN ID #1 is the default VLAN, and cannot
be deleted from the system.
To configure ports on a VLAN:
1 Click Switching > VLAN > Port Settings in the tree view to display the
Port Settings: Summary page.
All interfaces on the selected unit and their settings are displayed.
2 To modify the port settings, click Edit, and enter the fields:
– Port — Enter the port number to be modified.
– Port VLAN Mode — Enter the port VLAN mode. The possible
options are:
•
Access — The port belongs to a single untagged VLAN. When a
port is in Access mode, the packet types that are accepted on the
port cannot be designated. Ingress filtering cannot be
enabled/disabled on an access port.
console(config)# vlan database
console(config-vlan)# vlan 1972
console(config-vlan)# end
console(config)# interface vlan 1972
console(config-if)# name Marketing
console(config-vlan)# dot1x auth-not-req
console(config-if)# end