Dell PowerEdge VRTX User Manual
Page 82
82
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Defining SNTP Servers Settings Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the SNTP Server pages.
Table 6-9. SNTP Server CLI Commands
CLI Command
Description
sntp server {ip-address |
hostname} [poll] [key keyid]
no sntp server {ip-address |
hostname}
Configures the device to use SNTP to
request and accept SNTP traffic from a
server.
Use the no form of this command to
remove a server from the list of SNTP
servers.
sntp unicast client poll
no sntp unicast client poll
Enables polling for the SNTP predefined
Unicast clients.
Use the no form of this command to
disable the polling for the SNTP client.
show sntp status
Displays the SNTP server statuses.