Dell PowerEdge VRTX User Manual
Page 220
220
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
–
Source IP Address — Enter the source IP address to which addresses
in the packet are compared. The following options are available:
•
Prefix Length —The number of bits that comprise the source IP
address prefix of the subnetwork.
•
Any — Check to indicate that the source address is not matched.
–
Dest. IP Address — Enter the destination IP address to which
addresses in the packet are compared. The following options are
available:
•
Prefix Length —The number of bits that comprise the
destination IP address prefix of the subnetwork.
•
Any — Check to indicate that the destination address is not
matched.
–
Traffic Class — Select one of the following options:
•
Match DSCP — Matches the packet DSCP value to the ACL.
•
Match IP Precedence — Matches the IP-precedence with the
packet IP-precedence value. IP-precedence enables marking
frames that exceed CIR threshold. In a congested network, frames
containing a higher DP value are discarded before frames with a
lower DP value.
–
Time Range Name — Check to associate a time range with the ACE.
Select one of the time ranges defined in the Time Range page.
–
Action — The ACL forwarding action. The following options are
available:
•
Permit — Forwards packets that meet the ACL criteria.
•
Deny — Drops packets that meet the ACL criteria.
•
Shutdown — Drops packet that meet the ACL criteria, and
disables the port to which the packet was addressed.
–
Logging of Dropped Packets — Check to activate logging of dropped
packets.