Dell PowerEdge VRTX - Manual (Page 158)

158
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
– Authentication Port (0-65535) — Enter the authentication port used
to verify the RADIUS server authentication. Enter 0 if you do not
want this server to be used for authentication purposes.
– Accounting Port (0-65535) — Enter the accounting port, which is the
UDP port number of the RADUS server used for accounting requests.
Enter 0 if you do not want this server to be used for accounting
purposes.
– Usage Type — Enter the RADIUS server usage. The possible options
are:
• Login — Used for login authentication and/or accounting.
•
802.1x — Used for 802.1x authentication and/or accounting.
• All — Used for all types of authentication and/or accounting.
4 Enter the following fields if you do not want to use the default values
entered in the RADIUS: Summary page. If you do want to use the default
values, check Use Default for these fields.
–
Number of Retries (1-10) — Enter the number of requests sent to the
RADIUS server before a failure occurs.
– Timeout for Reply (1-30) — The amount of the time in seconds that
the device waits for an answer from the RADIUS server before retrying
the query, or switching to the next server.
– Dead Time (0-2000) — The amount of time (in minutes) that a
RADIUS server is bypassed for service requests.
– Key String (0-128 Characters) — The key string used for
authenticating and encrypting all RADIUS communications between
the device and the RADIUS server.
– Source IP Address — The device IP address that is used for
communication with RADIUS servers.