Dell PowerEdge VRTX - Manual (Page 266)

266
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Ports.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
description string
no description
Adds a description to an interface
configuration.
Use the no form of this command to
remove the description.
shutdown
no shutdown
Disables an interfaces.
Use the no form of this command to
restart a disabled interface.
set interface active { interface-
id }
Reactivates an interface that is
shutdown.
speed {10|100|1000|}
no speed
Configures the speed of a given
Ethernet interface when not using
auto negotiation.
Use the no form of this command to
restore the default configuration.
duplex {half|full}
no duplex
Configures the full/half duplex
operation of a given Ethernet
interface when not using auto
negotiation.
negotiation [capability
[capability2…capability5]
no negotiation
Enables auto negotiation operation
for the speed and duplex parameters
of a given interface.
Use the no form of this command to
disable auto-negotiation.
back-pressure
no back-pressure
Enables Back Pressure on a given
interface.
Use the no form of this command to
disable back pressure.
flowcontrol {auto|on|off}
no flowcontrol
Configures the flow control on a
given interface.
Use the no form of this command to
disable flow control.
Table 8-8. Port Configuration CLI Commands (Continued)
CLI Command Description