Dell PowerEdge VRTX - Manual (Page 165)

165
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
• Fifth octet — Set to 3 to indicate the MAC address that follows.
•
Last 6 octets — MAC address of the device.
– SNMP Notifications — Enable/disable the switch sending SNMP
notifications.
– Authentication Notifications — Enable/disable the switch sending
SNMP traps when authentication fails.
3 To add a remote Engine ID, click Add.
4 Enter the following fields:
– Supported IP Format— Select either IPv4 or IPv6.
– IPv6 Address Type — This can be either a Link Local or Global IPv6
address.
– Link Local Interface — Select whether the link local address is the
default VLAN or an ISATAP tunnel (for IPv6).
– IP Address — Enter the IP address.
– Engine ID— Enter the remote Engine ID.