Dell PowerEdge VRTX - Manual (Page 316)

316
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
2 Enter the fields:
– Show VLAN — Check one of the possible options:
•
VLAN ID — Check VLAN ID, and select a VLAN ID to view.
• VLAN Name — Check VLAN Name, and select a VLAN ID to
view.
– VLAN Name (0-32 Characters) — Enter a new VLAN name.
– Status — The VLAN type. Possible values are:
•
Dynamic — The VLAN was dynamically created through GVRP.
• Static — The VLAN is user-defined.
– Authentication Not Required — Enable/disable authentication on
the VLAN.
3 To define a new VLAN, click ADD, and enter the fields. The fields in this
page are described above.
Defining VLAN Membership Using CLI Commands
The following table summarizes the CLI commands for defining VLAN
membership as displayed in the VLAN Membership pages.
Table 12-1. VLAN Membership CLI Commands
CLI Command Description
vlan database
Enters the VLAN configuration mode.
vlan {vlan-range}[name vlan-
name]
no vlan vlan-range
Creates a VLAN.
Use the no form of this command to
restore the default configuration or
delete a VLAN.
name string
no name
Adds a name to a VLAN.
Use the no form of this command to
remove the VLAN name.
dot1x auth-not-req
no dot1x auth-not-req
Enables unauthorized devices access to
the VLAN.
Use the no form of this command to
disable access to the VLAN.