Dell PowerEdge VRTX - Manual (Page 196)

196
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
• Global — A globally unique IPv6 address; visible and reachable
from different subnets.
– Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
•
VLAN— The VLAN on which the IPv6 interface is configured.
• ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
To upload a configuration file using HTTP
3 Select Upload via HTTP to upload a configuration file.
4 Enter the fields:
– Transfer File Name — The configuration file being uploaded. The
possible options are:
•
Running Configuration — Uploads the Running Configuration
file.
• Startup Configuration — Uploads the Startup Configuration file.
5 Click Activate to start the upload process. A message will be displayed
asking where for the path of the destination file.
To upload a configuration file using TFTP
6 Select one of the options:
– Firmware Upload — A firmware file is uploaded.
– Configuration Upload — A configuration file is uploaded.
7 Select Upload via TFTP to upload firmware or a configuration file via a
TFTP server.
8 If Firmware Upload was selected, enter:
– TFTP Server IP Address — The TFTP server IP address to which the
software image is uploaded.
– Destination File Name (1-64 Characters) — The file name to which
the file is uploaded.
9 If Configuration Upload was selected, enter:
– TFTP Server IP Address — The TFTP server IP address to which the
configuration file is uploaded.