Dell PowerEdge VRTX - Manual (Page 242)

242
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
– Reject Reason — Reason that traffic was rejected. See Table 7-14 for a
list of the possible reject reasons.
– Time — Time that traffic was rejected.
Table 7-14. Reject Reason Description
Abbreviation Description
ACL-DEL ACL was deleted by a user.
ACL-NOTEXST ACL sent by the RADIUS server does not exist on the device.
ACL-OVRFL ACL sent by the RADIUS server cannot be applied because of
TCAM overflow.
AUTH-ERR Rejected by RADIUS due to wrong user name or password in
the RADIUS server.
FLTR-ERR RADIUS accept message contains more than two filter IDs.
FRS-MTH-DENY First method is deny.
IPv6WithMAC
RADIUS accept message contains filter with IPv6 DIP and
MAC addresses.
IPV6WithNotIP RADIUS accept message contains IPv6 and not IP
simultaneously.
POL-BasicMode Policy is not supported in the QoS basic mode.
POL-DEL Policy was deleted by a user.
POL-OVRFL Policy sent by radius server can not be applied because of
TCAM overflow.
RAD-APIERR RADIUS API returned error (e.g. No RADIUS server is
configured).
RAD_INVLRES RADIUS server returned invalid packet (e.g. EAP attribute is
missing).
RAD-NORESP RADIUS server is not responding.
VLAN-DFLT VLAN sent by a RADIUS server cannot be applied because it
is the default VLAN.
VLAN-DYNAM VLAN sent by RADIUS server cannot be applied because it is
a dynamic VLAN.
VLAN-GUEST VLAN sent by RADIUS server cannot be applied because it is
the Guest VLAN.