Dell PowerEdge VRTX - Manual (Page 325)

325
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_VLAN.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Defining Protocol Groups
Define protocol groups in two steps:
1 Define a protocol group by assigning one or more protocols to the group
and giving it a protocol-group ID (any integer), using the Protocol Group
pages.
2 Associate the group with a desired VLAN classification, per port, using the
Protocol Port pages.
To define a protocol group:
1 Click Switching > VLAN > Protocol Group in the tree view to display
the Protocol Group: Summary page.
The currently-defined protocol groups are displayed.
2 To add a new protocol group, click Add, and enter the fields:
– Frame Type — Select a frame type to be accepted in the protocol
group.
– Protocol Value — Select a protocol name.
or
– Ethernet-Based Protocol Value (0600 - FFFF) — Enter the Ethernet
protocol group type.
– Protocol Group ID — Assign a protocol group ID number.
Defining VLAN Protocol Groups Using CLI Commands
The following table summarizes the CLI commands for defining VLAN
Protocol groups.
Table 12-3. VLAN Protocol Groups CLI Commands
CLI Command Description
map protocol protocol
[encapsulation-value]
protocols-group group
no map protocol protocol
[encapsulation]
Maps a protocol to a protocol group.
Protocol groups are used for protocol-
based VLAN assignment.
Use the no form of this command to
delete a protocol from a group.