Dell PowerEdge VRTX - Manual (Page 270)

270
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Ports.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Configuring LAGs Using CLI Commands
The following table summarizes the CLI commands for configuring LAGs as
displayed in the LAG Configuration pages.
Table 8-9. LAG Configuration CLI Commands
CLI Command Description
interface port-channel LAG-
number
Enters the interface configuration
mode of a specific LAG.
channel-group port-channel mode
{on|auto}
no channel-group
Sets a mode for a LAG.
Use the no form of this command
restore the default configuration.
description string
no description
Adds a description to a LAG.
Use the no form of this command to
remove the description.
shutdown
no shutdown
Disables the LAG.
Use the no form of this command to
restart the LAG.
speed {10|100|1000}
no speed
Configures the speed of the LAG
when not using auto negotiation.
Use the no form of this command to
restore the default configuration.
negotiation [capability
[capability2…capability5]
no negotiation
Enables auto negotiation operation for
the speed and duplex parameters of a
LAG.
Use the no form of this command to
disable auto-negotiation.
flowcontrol {auto|on|off}
no flowcontrol
Configures the flow control on a given
LAG.
Use the no form of this command to
disable flow control.
show interfaces configuration
[ interface-id | detailed]
Displays the configuration for the
LAGs.
show interface advertise
[ interface-id | detailed]
Displays the LAG’s negotiation
advertisement settings.