Dell PowerEdge VRTX - Manual (Page 183)

183
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
device. This can be done manually in the Copy Files page or see "Auto-
Update/Configuration Feature" on page 184 for more information about
how to perform this automatically.
• Image Files—Files with extension .ros. System file images are saved in two
flash files called Image 1 and Image 2. The active image contains the
active copy, while the other image contains a backup copy. The device
boots and runs from the active image. If the active image is corrupted, the
system automatically boots from the non-active image. This is a safety
feature for faults occurring during the software upgrade process.
Downloading/Uploading System Files
System files can be manually loaded from (downloaded) or copied to
(uploaded) a TFTP server. This can be done in one of the following ways:
• Manually—System files can be downloaded using the File Download page
and uploaded using the File Upload page.
• Automatically (Auto Update/Configuration)—System files can be
downloaded automatically, as follows:
–
Auto-Configuration—If the Auto-Configure feature is enabled (in the
Auto Update of Configuration/Image File page), the Startup
Configuration file (in various conditions described below) might be
automatically updated after reboot.
– Auto-Update—If the Firmware Auto-Update feature is enabled in the
Auto Update of Configuration/Image File page, the image file is might
be automatically updated (in various conditions described below).