Dell PowerEdge VRTX - Manual (Page 354)

354
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Multicast.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
• Operational Last Member Query Counter — Displays the
operational value of the Last Member Query counter.
• Last Member Query Interval (100-25500) — Enter the time between
two consecutive group-specific queries that are sent by the querier.
• Operational Last Member Query Interval — Displays the Last
Member Query Interval sent by the elected querier.
• Intermediate Leave — Enable/disable an immediate timeout period.
The default timeout is 10 seconds.
• IGMP Querier Status — Enables or disables the IGMP Querier. The
IGMP Querier simulates the behavior of a Multicast router, enabling
snooping of the Layer 2 Multicast domain even though there is no
Multicast router.
• Querier Source IP Address — Select the IP address of the IGMP
Querier. Use either the VLAN’s IP address or define a unique IP
address that will be used as a source address of the querier.
• Operational Source Querier IP Address — Operational Querier IP
address.
Configuring IGMP Snooping Using CLI Commands
The following table summarizes the CLI commands for configuring IGMP
snooping on a VLAN:
Table 14-5. IGMP Snooping CLI Commands
CLI Command Description
ip igmp snooping vlan vlan-id
no ip igmp snooping vlan vlan-
id
Enables IGMP snooping on a specific
VLAN.
Use the no form of this command to
disable IGMP snooping on a VLAN
interface.
ip igmp snooping vlan vlan-id
mrouter learn pim-dvmrp
no ip igmp snooping vlan vlan-
id mrouter learn pim-dvmrp
Enables automatic learning of
Multicast router ports in the context of
a specific VLAN.
Use the no form of this command to
remove the configuration.