Dell PowerEdge VRTX - Manual (Page 326)

326
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
The following is a sample of the CLI commands:
Protocol Port
A protocol port is a port assigned to a particular protocol group. Traffic from
particular types of frames may be assigned to a protocol group, which has a
port and VLAN associated with it.
To add an interface to a protocol group:
1 Click Switching > VLAN > Protocol Port in the tree view to display the
Protocol Port: Summary page.
A list of previously-defined protocol groups is displayed.
2 To assign an interface to a protocol group, click Add, and enter the fields:
– Interface — Port number to be added to a protocol group.
– Group ID — Select a protocol group ID to which the interface is
added.
Protocol ports can either be attached to a
VLAN ID or a VLAN name.
– VLAN ID (1- 4094) —Check and enter a VLAN ID.
or
– VLAN Name — Check and enter a VLAN name.
Defining Protocol Ports Using CLI Commands
The following table summarizes the CLI command for defining protocol
ports.
console (config)# vlan database
console (config-vlan)# map protocol ip protocols-group 213
Table 12-4.
Protocol Port CLI Commands
CLI Command Description
switchport general map
protocols-group group vlan
vlan-id
no switchport general map
protocols-group group
Sets a protocol-based classification rule.
Use the no form of this command to
delete a classification.