Dell PowerEdge VRTX - Manual (Page 218)

218
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
To define IPv6-based ACLs:
1 Click Switching > Network Security > IPv6 Based ACL to display the
IPv6 Based ACL: Summary page.
A list of all of the currently defined IPv6-based ACLs is displayed.
2 To add a new ACL, click Add ACL.
3 Enter the name of the new ACL. Names are case-sensitive.
Configuring IPv6-based ACLs Using CLI Commands
The following table summarizes the CLI commands for configuring
I Pv6-based ACLs .
The following is an example of some of the CLI commands:
IPv6-Based ACEs
To add a rule to an IPv6-based ACL:
1 Click Switching > Network Security > IPv6 Based ACE to display the
IPv6 ACE: Summary page.
The currently-defined rules for the selected ACL are displayed.
2 To add a rule click Add ACE.
3 Select a user-defined ACL for which a rule is being created.
4 Enter the following fields:
– New Rule Priority — Enter the ACE priority that determines which
ACE is matched to a packet, based on a first match.
Table 7-6. IP-Based ACL CLI Commands
CLI Command Description
ipv6 access-list [acl-name]
no ipv6 access-list [acl-name]
Defines an IPv6 access list and places
the device in IPv6 access list
configuration mode
Use the no form of this command to
remove the access list.
console(config)# ipv6 access-list server-acl