Dell PowerEdge VRTX - Manual (Page 188)

188
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Auto Update of Configuration File
To set the auto update and configuration parameters:
. NOTE: For the automatic options in this page to work the following must be
implemented:
•
Since Auto-Config depends on retrieving information from a DHCP server, the
startup configuration needs to include a DHCP IP interface. The device is
defined as a DHCP client, as described in "IPv6 Interfaces" on page 105. After
reboot, this command is not saved in the Startup configuration.
• Preparations described above must be completed on the DHCP server and
TFTP servers.
1 Click System > File Management > Auto Update of
Configuration/Image File in the tree view to display the Auto Update of
Configuration/Image File page.
The auto-update-configuration options are displayed.
2 Modify the auto-update configuration parameters as required:
– Configuration Auto-Config (boot host auto-config)— Enable/disable
automatic download of the configuration parameters to the Running
Configuration file. By default, this occurs only if the Startup
Configuration file is empty.
– Firmware Auto-Update (boot host auto-update)— Enable/disable
automatic download of the image file.
– Force Configuration Download at Next Startup (boot host dhcp) —
Enable/disable the Configuration Auto Update option to work even if
the Startup Configuration file is not empty.
– Auto-Copy Running Configuration to Startup Configuration After
Download (boot host auto-save)— Enable/disable the Running
Configuration file to be automatically copied to the Startup
Configuration file after downloading the Running Configuration file.