Dell PowerEdge VRTX - Manual (Page 355)

355
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Multicast.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
ip igmp robustness count
no ip igmp robustness
Changes the value of the IGMP
robustness variable.
Use the no format of the command to
return to default.
ip igmp query-interval seconds
no ip igmp query-interval
Configures the Query interval.
Use the no format of the command to
return to default.
ip igmp query-max-response-
time seconds
no ip igmp query-max-response-
time
Configures the Query Maximum
Response time.
Use the no format of the command to
return to default.
ip igmp last-member-query-
count count
no ip igmp last-member-query-
count
Configures the Last Member Query
Counter.
Use the no format of the command to
return to default.
ip igmp snooping vlan vlan-id
immediate-leave
no ip igmp snooping vlan vlan-
id immediate-leave
Enables the IGMP Snooping
Immediate-Leave processing on a
VLAN.
Use the no format of the command to
disable IGMP Snooping Immediate-
Leave processing.
ip igmp snooping vlan vlan-id
querier
no ip igmp snooping vlan vlan-
id querier
Enables the IGMP querier on a specific
VLAN.
Use the no form of this command to
disable the IGMP querier on a VLAN
interface.
ip igmp snooping vlan vlan-id
querier address ip-address
no ip igmp snooping vlan vlan-
id querier address
Defines the source IP address that the
IGMP Snooping querier would use.
Use the no form of this command to
return to default.
Table 14-5. IGMP Snooping CLI Commands (Continued)
CLI Command Description