Dell PowerEdge VRTX - Manual (Page 70)

70
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
– European — The device switches to DST at 1:00 am on the last
Sunday in March, and reverts to standard time at 1:00 am on the last
Sunday in October. The European option applies to EU members,
and other European countries using the EU standard.
– Other — Specifies that you will set DST manually in the fields
described below.
If you selected USA or European you are finished. If you selected Other,
proceed to the next step.
There are two types of DST possible when
Others is selected. You can set a
specific date in a particular year, or you can set a recurring setting,
irrespective of the year. For a specific setting in a particular year, complete
the Daylight Savings area, and for a recurring setting, complete the
Recurring area.
If
Other is selected, the From and To fields must be defined either in the
Non-recurring or Recurring section.
4 To enter non-recurring DST parameters, enter the following fields:
– From — The time that DST begins. The possible options are:
•
DD/MMM/YY — The date, month, and year at which DST
begins.
• HH/MM — The time (hour and minutes) at which DST begins.
– To — The time that DST ends. The possible options are:
•
DD/MMM/YY — The date, month, and year at which DST ends.
• HH/MM — The time (hour and minutes) at which DST ends.
5 To enter recurring DST parameters, select Recurring and enter the
following fields:
–
From — The time that DST begins each year, for example, DST
begins locally every second Sunday in April at 5:00 am. The possible
options are:
•
Day — The day of the week from which DST begins every year.
• Week — The week within the month from which DST begins
every year.
• Month — The month of the year in which DST begins every year.