Dell PowerEdge VRTX - Manual (Page 430)

430
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGQoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Mapping CoS Priorities to Queues Using CLI Commands
The following table summarizes the CLI commands for configuring fields in
the CoS to Queue page.
The following is an example of the CLI commands:
DSCP to Queue
Mapping CoS Priorities to Queues Using CLI Commands
The following table summarizes the CLI commands for configuring fields in
the CoS to Queue page.
The following is an example of the CLI commands:
DSCP to Queue
The DSCP to Queue mapping determines the egress queues of the incoming
IP packets, based on their DSCP values. The original VPT (VLAN Priority
Tag) of the packet is unchanged.
Table 19-4. CoS to Queue CLI Commands
CLI Command Description
wrr-queue cos-map queue-id
cos0 ... cos7
no wrr-queue cos-map [queue-
id]
Maps CoS values to the egress queues.
Use the no form of this command to
restore the default configuration.
console(config)# wrr-queue cos-map 4 7
Table 19-5. CoS to Queue CLI Commands
CLI Command Description
wrr-queue cos-map queue-id
cos0 ... cos7
no wrr-queue cos-map [queue-
id]
Maps CoS values to the egress queues.
Use the no form of this command to
restore the default configuration.
console(config)# wrr-queue cos-map 4 7