Dell PowerEdge VRTX - Manual (Page 341)

341
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_LAG.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
3 To modify LACP parameters for a particular port, click Edit, and enter the
following fields:
–
Select a Port — Select the port for which timeout and priority values
are assigned.
– LACP Port Priority (1-65535) — Enter the LACP priority value for
the port.
– LACP Timeout — Select the rate of periodic transmissions of LACP
PDUs. The possible options are:
•
Long — Slow transmission rate
• Short — Fast transmission rate
Configuring LACP Parameters Using CLI Commands
The following table summarizes the CLI commands for configuring LACP
parameters as displayed in the LACP Parameters page.
Table 13-1. LACP Parameters CLI Commands
CLI Command Description
lacp system-priority value
no lacp system-priority
Configures the system priority.
Use the no form of this command to
restore the default configuration.
lacp port-priority value
no lacp port-priority
Configures the priority value for
physical ports.
Use the no form of this command to
restore the default configuration.
lacp timeout { long | short }
no lacp timeout
Assigns an administrative LACP
timeout.
Use the no form of this command to
restore the default configuration.
show lacp interface-id
[parameters | statistics |
protocol-state]
Displays LACP information for
ethernet ports.