Dell PowerEdge VRTX - Manual (Page 260)

260
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Ports.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
– Fast Link — Displays whether Fast Link mode is enabled for the port.
If this is enabled, the Port State is automatically placed in the
Forwarding state when the port is up.
– BPDU Guard — Displays whether BPDU Guard is enabled on the
port.
Miscellaneous fields:
–
Policy Name — Displays the name of a policy if one is defined on the
port.
– Auto Negotiation — Displays whether auto-negotiation is enabled on
the port. Auto-Negotiation enables a port to advertise its transmission
rate, duplex mode, and Flow Control abilities to other devices.
6 Click Apply Profile to apply the profile to the specified interface.
Configuring Port Profile Using CLI Commands
The following table summarizes the CLI commands for configuring port
profiles.
Table 8-5. Port Profiles CLI Commands
CLI Command Description
macro {apply|trace} macro-name
[parameter-name1 {value}]
[parameter-name2 {value}]
[parameter-name3 {value}]
Applies a macro to an interface or
traces a macro configuration on an
interface.
show parser macro
[{brief|description [interface
interface-id | detailed]| name
macro-name}]
Displays the parameters for all
configured macros or for one
macro on the switch.