Mode – Dell POWEREDGE M1000E User Manual
Page 126
Advertising
110
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
mode
6
mode
Sets the LLDP mode on the switch.
Synopsis
mode tx | rx
no mode
Operands
tx
Specifies to enable only the transmit mode.
rx
Specifies to enable only the receive mode.
Defaults
Both transmit and receive modes are enabled.
Command
Modes
Protocol LLDP configuration mode
Description
Use this command to set the LLDP mode on the switch. Use the no mode command to return to the
default setting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To enable only the transmit mode:
switch(conf-lldp)#mode tx
See Also
show lldp
Advertising