Mac access-list extended – Dell POWEREDGE M1000E User Manual

Page 161

Advertising
background image

Dell Converged Enhanced Ethernet Command Reference

145

53-1002115-01

mac access-list extended

10

mac access-list extended

Creates and assigns a name to the extended MAC access list.

Synopsis

mac access-list extended name

no mac access-list extended name

Operands

name

Assigns a name to the MAC extended access list. The maximum character
limit is 64.

Command

Modes

Global configuration mode

Description

Use this command to create an extended MAC access list. If the ACL is already created, this
command puts the switch in the extended MAC access-list configuration mode. Use the no mac
access-list extended command to remove the access list.

Extended ACLs allow you to filter traffic based on the following:

Source MAC address

Destination MAC address

EtherType

You can apply named MAC extended ACLs to VLANs and to Layer 2 interfaces.

Usage

Guidelines

Standard and extended MAC ACLs cannot share the same name.

Example

To create a MAC extended ACL named mac1:

switch(config)#mac access-list extended mac1

switch(conf-macl-ext)#

To delete a MAC extended ACL named mac1:

switch(config)#no mac access-list extended mac1

See Also

deny, permit, show access-lists

Advertising