Qos cos-mutation – Dell POWEREDGE M1000E User Manual
Page 261
Dell Converged Enhanced Ethernet Command Reference
245
53-1002115-01
qos cos-mutation
16
qos cos-mutation
Applies a CoS-to-CoS (COS) mutation QoS map on an interface.
Synopsis
qos cos-mutation name
no qos cos-mutation
Operands
name
Specifies the name of the CoS mutation map.
Defaults
There is no explicit CoS-to-CoS mutation QoS map applied; by default the inbound CoS equals the
outbound CoS.
Command
Modes
Interface configuration mode
Description
Use this command to apply a CoS-to-CoS mutation QoS map on an interface.
Usage
Guidelines
This command applies a CoS-to-CoS mutation map on an interface. The qos cos-mutation
command is not available if the interface is in CEE Provisioning mode. Use the no qos cos-mutation
command to remove the CoS-to-CoS mutation map.
Examples
To activate the CoS-to-CoS mutation QoS map on the interface:
switch(conf-if-te-0/1)#qos cos-mutation test
To remove the CoS-to-CoS mutation QoS map on the interface:
switch(conf-if-te-0/1)#no qos cos-mutation
See Also
qos map cos-mutation, show qos maps