Dell POWEREDGE M1000E - Manual (Page 276)

260 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show qos interface
16
show qos interface
Displays a summary of all QoS configurations applied on an interface.
Synopsis show qos interface {{in | ex}tengigabitethernet slot/port | linecard slot portset chip | all}
Operands interface Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
interface Use this keyword to specify any of the following interfaces:
linecard portset Reports the QoS configuration for all 10 Gbps Ethernet interfaces within an
ASIC.
slot Specifies the ASIC linecard slot number within the chassis.
chip Specifies the ASIC number within the linecard.
all Reports QoS configurations for all interfaces within the system.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display a summary of all QoS configuration applied on an interface, including
QoS Provisioning mode, CEE map, Layer 2 priority, Traffic Class mapping, congestion control, and
the scheduler policy.
Usage
Guidelines
If no interface is specified, QoS information about all interfaces is displayed.
Examples To display all of the configured QoS information for a 10 Gbps Ethernet interface:
switch#show qos interface intengigabitethernet 0/1
Interface InTenGigabitEthernet 0/1
Provisioning mode cee
CEE Map demo
Default CoS 0
Interface trust cos
CoS-to-CoS Mutation map 'default'
In-CoS: 0 1 2 3 4 5 6 7
-----------------------------------------------------
Out-CoS/TrafficClass: 0/4 1/4 2/6 3/4 4/4 5/4 6/4 7/4
Tail Drop Threshold 1081344 bytes
Per-CoS Tail Drop Threshold (bytes)