Dell POWEREDGE M1000E - Manual (Page 65)

Dell Converged Enhanced Ethernet Command Reference 49
53-1002115-01
show vlan
3
show vlan
Displays information about a specific VLAN interface.
Synopsis show vlan {vlan_id | brief |classifier | fcoe}
Operands vlan_id Specifies the VLAN interface to display. The range of valid values is 1-3583.
brief Specifies to display VLAN information for all interfaces including static and
dynamic.
classifier Specifies to display all VLAN classification information.
fcoe Specifies to display all FCoe VLAN interfaces.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to display information about VLAN.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To show information on a VLAN:
switch#show vlan 1
VLAN Name State Ports
(u)-Untagged, (t)-Tagged
(c)-Converged
======= ================ ======= ===============================
1 default ACTIVE Te 0/0(t) Te 0/4(t) Te 0/5(t)
Te 0/8(t) Te 0/10(t) Te 0/11(c)
Po 1(t) Po 63(t)
See Also none