Dot1x authentication – Dell POWEREDGE M1000E User Manual
Page 285
Advertising
Dell Converged Enhanced Ethernet Command Reference
269
53-1002115-01
dot1x authentication
17
dot1x authentication
Enables dot1x on a port.
Synopsis
dot1x authentication
no dot1x authentication
Operands
none
Defaults
There are no defaults for this command.
Command
Modes
Interface configuration mode
Description
Use this command to enable dot1x on a port. Use the no dot1x authentication command to disable
dot1x on the port and remove the configuration from 802.1X management.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To enable dot1x on a port:
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#dot1x authentication
See Also
none
Advertising