Dell POWEREDGE M1000E - Manual (Page 48)

32 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show media interface
2
show media interface
Displays the SFP information for a specific interface.
Synopsis show media interface {{in | ex}tengigabitethernet slot/port}
Operands extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to display a summary of the SFP information for the specified interface.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display SFP information for 10 Gbps Ethernet interface:
switch#show media interface extengigabitethernet 0/1
Interface InTenGigabitEthernet 0/1
Identifier 3 SFP
Connector 7 LC
Transceiver 0000000000000010 10_GB/s
Name id
Encoding 6
Baud Rate 103 (units 100 megabaud)
Length 9u 0 (units km)
Length 9u 0 (units 100 meters)
Length 50u 8 (units 10 meters)
Length 62.5u 3 (units 10 meters)
Length Cu 0 (units 1 meter)
Vendor Name BROCADE
Vendor OUI 42:52:4f
Vendor PN 57-0000075-01
Vendor Rev A
Wavelength 850 (units nm)
Options 001a Loss_of_Sig,Tx_Fault,Tx_Disable
BR Max 0
BR Min 0
Serial No AAA108454100431
Date Code 081108
Temperature 44 Centigrade
Voltage 3246.8 (Volts)
Current 0.002 (mAmps)
TX Power 0.1 (uWatts)
RX Power 0.1 (uWatts)
See Also show media, show media linecard